Uniden SDS100 firmware 1.05.00 main / 1.01.05 sub (open beta)
=============================================================

WHAT THIS IS
Open-beta main firmware 1.05.00 with sub 1.01.05, posted on 27 July 2018. It
fixed Site NAC operation for compared NACs and digital end-code detection on
Motorola systems, modified P25 Phase 1 voice-channel termination, and
introduced the Site NAC Operation setting.

IMPORTANT: BETA - superseded. Posted by Uniden (forum user UPMan) in a
RadioReference open-beta thread; kept for the record. A scanner should run the
current public release via Sentinel.

This is BETA firmware from 2018-2019. Uniden hosted it in the "PartnerWeb"
area of its support wiki and announced it in RadioReference open-beta threads.
It is superseded and is kept for the record only.

APPLIES TO
The Uniden SDS100 (US model) only. Not for the SDS100E/SDS200E, SDS150,
BCD436HP or BCD536HP.

BEFORE STARTING
  - A Windows PC and the scanner's USB cable (SDS100: mini-USB port on the
    side; SDS200: mini-USB port on the front).
  - A backup of the whole microSD card and of the Favorites Lists (Sentinel).
  - SDS100: a charged battery. SDS200: the power supply connected.

CONTENTS OF THIS ZIP
The download zip holds the vendor file exactly as Uniden published it, plus
this README.txt and SHA256SUMS.

  SDS-100_V1_05_00M_V1_01_05S.zip  (2218023 bytes)
    SHA-256 6a307ad4a0d4e43e7ddd1a367e67021508ee40d3bdcabce1e872d5fa81195d2d

  Inside SDS-100_V1_05_00M_V1_01_05S.zip:
    SDS-100-SUB_V1_01_05.firm
      sub-processor firmware 1.01.05
      80240 bytes
      SHA-256 e7b0a6313850b6b6ff105a24b10779e3b37bc2b654f5356bdbd3a0d8a6fbe3f2
    SDS-100_V1_05_00.bin
      main (CPU) firmware 1.05.00, open beta
      2162688 bytes
      SHA-256 c2b0061169f1a315391abdb74d6922672696e7fdb145cec7fc398c1e6621cdd9

INSTALLATION
Uniden's beta posts gave only brief steps ("copy the appropriate file ... to
the firmware folder of your scanner and reboot"); the fuller steps below
follow Uniden's later manual-install readmes for the same scanners.

  1. Connect the scanner and choose Mass Storage (press E at "Select USB
     mode").
  2. Open the removable disk, then BCDx36HP -> firmware. Leave the two .dat
     files alone.
  3. Copy SDS-100_V1_05_00.bin and SDS-100-SUB_V1_01_05.firm into the
     "firmware" folder.
  4. Restart the scanner; it applies the update while booting. Do not
     interrupt it.

VERIFYING
Menu -> Settings -> See Scanner Information -> Firmware Version.

IF SOMETHING GOES WRONG
  - Beta firmware was issued for testing and carries no support. Return to a
    public release with Sentinel -> UPDATE -> Update Firmware.
  - If the scanner will not start properly after files were removed from the
    "firmware" folder, Sentinel -> Clear User Data rebuilds the card (erasing
    user data).

DOWNGRADING
Moving back to an older public build by hand uses the same copy-and-restart
method with that build's files. Sentinel always installs the newest release.

PROVENANCE
  - Official source:
    https://info.uniden.com/twiki/pub/PartnerWeb/SDS100-Beta/SDS-100_V1_05_00M_V1_01_05S.zip
  - Announced in:
    https://forums.radioreference.com/threads/sds100-firmware-1-05-00m-1-01-05s-open-beta.374325/
  - Wayback copy:
    https://web.archive.org/web/20240816012757/http://info.uniden.com/twiki/pub/PartnerWeb/SDS100-Beta/SDS-100_V1_05_00M_V1_01_05S.zip
  - Retrieved: 2026-09-18. Status: verified (Uniden's own server; SHA-1
    matches the Wayback capture).

MORE INFORMATION
  - scanners.fubsypoly.com, Uniden SDS100 - Vol 5, Upgrades & Firmware:
    https://scanners.fubsypoly.com/uniden-sds100/vol-5/
  - Reference Library, Easier to Read SDS100/SDS200 Manual:
    https://scanners.fubsypoly.com/library/easier-to-read-sds100-200-manual/
  - Uniden change log:
    https://info.uniden.com/twiki/bin/view/UnidenMan4/SDS100FirmwareUpdate
