Uniden SDS100 firmware 1.06.00 main / 1.01.05 sub (public beta)
===============================================================

WHAT THIS IS
Public-beta main firmware 1.06.00 with sub 1.01.05, posted on 28 September
2018. It fixed a freeze with more than 1,000 recording sessions, added
Capacity Max late-entry decoding, modified the Capacity Max LCN Finder and
changed DMR TGID validation - the same notes that later appeared under public
release 1.07.00 (24 January 2019).

IMPORTANT: BETA - superseded. Posted by Uniden (forum user UPMan) in a
RadioReference open-beta thread; kept for the record. A scanner should run the
current public release via Sentinel.

This is BETA firmware from 2018-2019. Uniden hosted it in the "PartnerWeb"
area of its support wiki and announced it in RadioReference open-beta threads.
It is superseded and is kept for the record only.

APPLIES TO
The Uniden SDS100 (US model) only. Not for the SDS100E/SDS200E, SDS150,
BCD436HP or BCD536HP.

BEFORE STARTING
  - A Windows PC and the scanner's USB cable (SDS100: mini-USB port on the
    side; SDS200: mini-USB port on the front).
  - A backup of the whole microSD card and of the Favorites Lists (Sentinel).
  - SDS100: a charged battery. SDS200: the power supply connected.

CONTENTS OF THIS ZIP
The download zip holds the vendor file exactly as Uniden published it, plus
this README.txt and SHA256SUMS.

  SDS100-1.06.00M-1.01.05S.zip  (2218023 bytes)
    SHA-256 dfe3e932e2855ecb80a71e3b1b8389135216b80064eed742e60db4ed272a3da2

  Inside SDS100-1.06.00M-1.01.05S.zip:
    SDS-100-SUB_V1_01_05.firm
      sub-processor firmware 1.01.05
      80240 bytes
      SHA-256 e7b0a6313850b6b6ff105a24b10779e3b37bc2b654f5356bdbd3a0d8a6fbe3f2
    SDS-100_V1_06_00.bin
      main (CPU) firmware 1.06.00, public beta
      2162688 bytes
      SHA-256 8ce5a39e4179fc605679c72e5fee3805c0f73f833a916b4948df24f29cfe6647

INSTALLATION
Uniden's beta posts gave only brief steps ("copy the appropriate file ... to
the firmware folder of your scanner and reboot"); the fuller steps below
follow Uniden's later manual-install readmes for the same scanners.

  1. Connect the scanner and choose Mass Storage (press E at "Select USB
     mode").
  2. Open the removable disk, then BCDx36HP -> firmware. Leave the two .dat
     files alone.
  3. Copy SDS-100_V1_06_00.bin and SDS-100-SUB_V1_01_05.firm into the
     "firmware" folder.
  4. Restart the scanner; it applies the update while booting. Do not
     interrupt it.

VERIFYING
Menu -> Settings -> See Scanner Information -> Firmware Version.

IF SOMETHING GOES WRONG
  - Beta firmware was issued for testing and carries no support. Return to a
    public release with Sentinel -> UPDATE -> Update Firmware.
  - If the scanner will not start properly after files were removed from the
    "firmware" folder, Sentinel -> Clear User Data rebuilds the card (erasing
    user data).

DOWNGRADING
Moving back to an older public build by hand uses the same copy-and-restart
method with that build's files. Sentinel always installs the newest release.

PROVENANCE
  - Official source:
    https://info.uniden.com/twiki/pub/PartnerWeb/Firmware/SDS100-1.06.00M-1.01.05S.zip
  - Announced in:
    https://forums.radioreference.com/threads/firmware-1-06-00m-public-beta.377275/
  - Wayback copy:
    https://web.archive.org/web/20240511092317/http://info.uniden.com/twiki/pub/PartnerWeb/Firmware/SDS100-1.06.00M-1.01.05S.zip
  - Retrieved: 2026-09-18. Status: verified (Uniden's own server; SHA-1
    matches the Wayback capture).

MORE INFORMATION
  - scanners.fubsypoly.com, Uniden SDS100 - Vol 5, Upgrades & Firmware:
    https://scanners.fubsypoly.com/uniden-sds100/vol-5/
  - Reference Library, Easier to Read SDS100/SDS200 Manual:
    https://scanners.fubsypoly.com/library/easier-to-read-sds100-200-manual/
  - Uniden change log:
    https://info.uniden.com/twiki/bin/view/UnidenMan4/SDS100FirmwareUpdate
